Water Heater Failed Suddenly? Here's How to Do Next
Water Heater Failed Suddenly? Here's How to Do Next
Blog Article
In this article down the page you will discover additional dependable additional info when it comes to How to Troubleshoot and Repair an Electric Water Heater.
Several modern-day homes make use of an electric hot water heater for their heating system, as a result of its convenience and convenience of use. Nevertheless, similar to any other electrical devices, troubles may arise with its usage, suddenly. It can be truly irritating to wake up to a cold shower rather than a warm one or having your bathroom with water that isn't warm adequate and even also hot. Whatever the situation may be, hot water heater troubles can be fairly aggravating. Luckily, we've made a listing of feasible services to your hot water heater concerns. There are a number of factors that could create a lot of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the problem is, getting it repaired need to not present excessive of an issue if you follow these steps:
Call A Professional:
If after changing all defective parts and resetting your temperature, the water heater still isn't working, you may need to speak to an expert plumber for a specialist opinion. The trouble with your heating system could be that the hot and cold taps have been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the case may be, a specialist plumber would certainly assist resolve the problem.
Examine Your Power Supply:
As fundamental as this might appear, it is very necessary. Without appropriate power, your hot water heater will certainly not operate. So the first thing to do when your water instantly stops working is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the concern, simply turn it off and on once again. Change any kind of broken or worn-out fuse. Check the home appliance with power after these modifications to see if it's now functioning.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot sufficient, you may require to check the temperature level settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This must aid warm the water. Transform the circuit breaker back on as well as inspect if the issue has actually been resolved.
Examine the Burner in the Hot Water Heater:
If it's not a power problem, then attempt checking out your heating element if it is still working. Check each of your burner to make sure the issue isn't with any one of them. If any of them is faulty, change that part and afterwards examine whether the hot water is back on.
Verdict
Hot water heater problems are not always significant. A lot of them result from small issues like a blown fuse or damaged burner. Replacing the malfunctioning parts must work. Nonetheless, if you are still unable to address the problem, give a call to your nearest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed our excerpt on Hot Water Heater Repair. Many thanks for taking a few minutes to read our posting. Do you know about somebody who is intrigued by the topic? Why not share it. Thank-you for taking the time to read it.
Contact Us Report this page